Full Tear-off and Roof Replacement in Plano – Hills at Prestonwood
This Hills at Prestonwood homeowner had been dealing with recurring roof problems for years, patching leaks and paying for repairs that never quite solved the underlying issue. After weighing a metal roof and finding it ruled out by neighborhood deed restrictions, she chose a roof replacement with Class 4 impact-resistant shingles built to hold up against North Texas hail and wind rather than another round of patchwork repairs.
Hills at Prestonwood – Plano
Hills at Prestonwood is a residential community in Plano, TX. Phillips Home Improvements serves this neighborhood and all of Plano — zip code 75093.
Project at a Glance
- Location: Plano, TX
- Neighborhood: Hills at Prestonwood
- Property Type: Two-Story Single-Family Residence
- Project Scope: Full tear-off and roof replacement, synthetic underlayment installation, self-sealing valley waterproofing barrier, multi-size pipe jack replacement, static and powered attic ventilation installation, drip edge replacement, and hip and ridge shingle installation
The Challenge: Repairs That Never Quite Fixed the Problem
Before contacting Phillips, this homeowner had already been through repeated roof repairs that kept addressing the same problem areas without resolving them for good. The aging laminate shingles on this two-story home had reached a point where patching individual sections was no longer a reliable fix.
The homeowner looked into a metal roof, but neighborhood deed restrictions ruled that option out. That led to a conversation about shingle systems built for durability instead — specifically Class 4 impact-resistant shingles, which offer a higher level of protection against the hail that drives most roof damage in this area.
The Discovery: A Steep Pitch and Ventilation Overdue for an Update
Tearing off the old roof removed 44.18 squares of worn laminate shingle material and exposed a 10/12 pitch across the full 50.807-square deck — steep enough to require careful footing and handling throughout the project. With the deck fully exposed, the crew inspected it for soft spots or damage before any new material went down.
The home’s ventilation setup, including 10 individual pipe jacks and multiple exhaust units, showed worn seals that were heading toward active leaks even though they hadn’t failed yet. That made a full ventilation rebuild part of the scope rather than an optional add-on.
The Solution: A Full System Rebuild With Class 4 Shingles
The crew installed 457 feet of galvanized drip edge in a T Bronze finish along the roof’s perimeter to direct water into the gutters without touching the wood fascia. Over the bare deck, we rolled out Owens Corning® ProArmor® synthetic underlayment across all 50.807 squares, replacing old felt paper with a tear-resistant layer that lays flat. In the valleys, where the most water runs during a storm, we installed 239 linear feet of Owens Corning® WeatherLock® Mat self-sealing waterproofing barrier, which seals tightly around every nail penetration.
The primary shingle layer is Owens Corning® Duration® architectural shingles in Sierra Gray, rated for winds up to 130 mph and certified Class 4 for impact resistance — the highest hail-resistance rating available under UL 2218 testing. To rebuild the ventilation system, we installed four box vents and two powered attic vents across the ridge lines. All 10 utility penetrations were fitted with new multi-size pipe jacks, sealed with Henry® 900 flashing and construction sealant, and the roof’s hips and ridges were finished with 499 linear feet of matching Owens Corning® ProEdge® hip and ridge shingles.
The Results: A Roof Built to Stop the Repair Cycle
The Sierra Gray architectural shingles give the home a cleaner, more dimensional look than the laminate shingles they replaced. More importantly, the new roof addresses what the old one couldn’t: the Class 4 impact rating and rebuilt ventilation system are designed to hold up against hail and heat rather than needing another round of patch repairs.
The project passed final city inspection with full approval, and the completed installation carries Texas Department of Insurance certification for its Class 4 impact resistance rating — documentation that can support premium considerations with the homeowner’s insurer.
The Phillips Way
How we handled every step of this project — from first inspection to final sign-off.
Step 1
Inspect & Document
Our team documented the deteriorated laminate shingles and worn flashing across the full 50.807-square roof before recommending a replacement.
Step 2
Consult & Confirm
We walked the homeowner through shingle options, including Class 4 impact-resistant shingles, to find a system built to stop the repair cycle for good.
Step 3
Prepare & Protect
Protective netting and a dedicated dumpster were set up on-site to keep landscaping and the surrounding property clear of debris during tear-off.
Step 4
Install & Restore
Crews installed Owens Corning Duration Class 4 shingles, synthetic underlayment, valley waterproofing, and rebuilt ventilation across the steep 10/12 pitch.
Step 5
Clean Up
The crew swept the yard with magnetic rollers to clear stray roofing nails and metal debris from the tear-off.
Step 6
Walkthrough & Sign-Off
The city inspector completed a full review of the installation and issued final code approval before the project closed out.
Materials Specification
| Material Category | Brand & Product Specification | Quantity / Square Footage |
|---|---|---|
| Primary Roofing Shingles | Owens Corning® Duration® Architectural Shingles, Sierra Gray, 130 MPH Wind Rating, Class 4 Impact Resistance | 50.807 Squares |
| Waterproof Valley Barrier | Owens Corning® WeatherLock® Mat Self-Sealing Waterproofing Barrier | 239 Linear Feet |
| Underlayment | Owens Corning® ProArmor® Synthetic Roof Underlayment | 50.807 Squares |
| Perimeter Drip Edge | Galvanized Drip Edge, 1-1/2″ Woodgrain, T Bronze Finish | 457 Feet |
| Eave Protection | Owens Corning® Starter Strip Shingle | 457 Linear Feet |
| Hip & Ridge Shingles | Owens Corning® ProEdge® Hip & Ridge Shingles, Sierra Gray | 499 Linear Feet |
| Utility Penetration Flashing | Galvanized Multi-Size Pipe Jack Flashing (1.5″–3″) | 10 Each |
| Powered Attic Ventilation | Lomanco 2000 Power Vent (Air Vent Power Cool Vent BR26 equivalent shipped) | 2 Each |
| Static Attic Ventilation | Lomanco Box Vent (Air Vent SLA Aluminum Slant Back equivalent shipped) | 4 Each |
| Pipe Protection Caps | Versa Cap Adjustable Vent Cap, Fits 3″–5″ Pipes | 5 Each |
| Structural Sealant | Henry® 900 Flashing & Construction Sealant, 10.1 oz | 4 Tubes |
| Valley Flashing Metal | Galvanized Roll Valley Metal, 20″ x 50′, Mill Finish | 1 Roll |
Why Proper Preparation Matters
A roof this steep — 10/12 pitch across nearly 51 squares — needs a clean, total tear-off before anything new goes down. The crew removed 44.18 squares of old laminate shingle down to bare deck, inspected the wood for soft spots, and cleared all fasteners before installing 457 feet of custom-fit drip edge around the perimeter to keep wind-driven rain off the fascia.
Materials Selected for Long-Term Performance
Given this homeowner’s history of recurring repairs, the material selection focused on durability over the cheapest option. Owens Corning® ProArmor® synthetic underlayment provides a tear-resistant secondary barrier that traditional felt paper can’t match. The Duration® shingles carry a 130 mph wind rating and Class 4 impact resistance — the highest hail-resistance rating tested under UL 2218 — which directly addresses the kind of damage that led to the previous repair cycle.
The Phillips Approach
Rather than another patch repair, this project replaced the full system down to the deck: new underlayment, valley barrier, drip edge, ventilation, and shingles, rather than layering new materials over old problems. All 10 utility pipe jacks were replaced with new galvanized components, and the ventilation system was rebuilt with both static and powered venting to manage attic heat. The project was carried through city permitting and final inspection, closing out with full code approval.
